Timbers - EdexcelReinforcing and stiffening

Forces act on materials all of the time - even if a material appears stationary it still has a force acting on it. There are three terms used to describe what type of force can act on a material:

• tension - a pulling force
• compression - a pushing force
• shear - forces acting across the material

Timber has good tensile strength and compressive strength because of its fibrous structure. Timber, if untreated, does not have good bending qualities and often snaps when bent. If a piece of timber has to be bent to shape, there are a few options to help prevent it from snapping. If timber is soaked in water or exposed to steam, it can become more flexible. Slots can be cut along the inside face of the timber to be bent allowing for the inside face to cope with the compressive force - this is called kerfing.

Frame structures

A square or rectangle is a commonly used shape for products, but it is not very strong and can easily turn into a diamond shape through torsion forces. A rectangle of timber can be strengthened by one, or a mixture, of the following:

• putting a thick panel inside the frame
• adding a diagonal strut or triangle across each of the corners
• adding a strut from corner to corner

Lamination

A laminate consists of two or more layers. Plywood is strengthened by having each layer of timber glued at right angles to each other.

Timber is easier to bend along the grain, but when another sheet of timber is glued at right angles it becomes hard to bend in any direction because the grains are at right angles to each other. As the plywood becomes thicker, the less likely it is to flex at all. This is referred to as high cross-sectional stability and is a desirable feature.

Braces and tie bars

A brace is similar to a strut; it is a bar that is added to strengthen a material or product. They usually go diagonally across a material to make triangle shapes. A tie bar is used in a similar manner and holds the frame in shape. While a strut resists compression, a tie bar resists tension. In construction, a tie bar sits across the structure where the roof meets the walls and acts to resist the weight of the roof.

Embedding composite materials

Timbers can be combined with other materials, such as metal and composites, combining the properties of these materials. For example, in construction, timber and steel connectors are used to take advantage of the natural strength and appearance of the wood as well as the strength and durability of steel.